Want to create a romantic setting? Or cozy and warm? Or maybe fun and festive? This floor lamp will definitely help you. Its pluses: - Soft light that does not cut your eyes. - Low power consumption. - Turn on and off the lamp, control the color and brightness can be from a remote control. A modern style that fits anywhere. - In addition to control and brightness, there is a smooth color changing mode and dynamic switching mode, quickly and slowly. In general, a lamp, but a find! The heart of the lamp is a Chinese garland with a controller and a remote control. Plus the power supply that comes with it. Pretty inexpensive, bought here - Aliexpress If you have big budget problems, then you can take a simple white LED strip and power off the power supply.Other materials: The rest of the materials that I used to make the lamp are not deficit and are available in anyhardware store. 1. Wooden corners 4 pieces - who trimmed with clapboard will understand what it is about, if not - ask the seller. 2. Wooden slats 4 pieces - there should be no questions. 3. Two types of fabric: 1) transparent with a pattern for effect. Type of organza, from which the curtains are made. 2) By denser, for scattering, fabric like calico. I confess at once - in fabrics and sewing, I am a complete zero. I just went to the sewing shop and chose what I want to see ... What exactly is the name I don’t remember. You can of course confine to one dense, but I just decided to stand out. 4. Plastic corners 3 pieces - any building. 5. Small nails.The first thing you need is to decide on the dimensions. I took a height of one and a half meters. Given this, I saw off 4 wooden corners. The main bearing parts of the lamp are ready.Now determine with the width - I took 30 cm.We begin to hammer together with small nails. We do everything neatly so that nothing cracks. If it suddenly bursts - take the PVA glue and glue it together.One side is ready. We fill corners on it, sawn to the width minus the thickness of the side.Everything needs to be done proportionally. Everything must be pre-marked with a pencil. Do not forget about the legs of the lamp. We assemble the frame - everything is ready. The biggest thing is done. That's what happened in the end.Now we take the LED tape and glue it to the corners.The height of the lamp 1.5 meters. I took the tape 3 meters, that is, it goes on one corner and diagonally differently. If you want more brightness - take the tape,to cover all 4 corners. LED tape is very good to stick to wood.Now alternately wrap in layers of cloth. First one, then the second. For fixing use a furniture stapler. All the cutting parts are cut off. All this is done very simply and quickly.Next, take the plastic corners. Take what color to like - the choice is now big. I thought a dark corner would harmonize well with the white color of the lamp and took it.Cut into corners and first glue the top and bottom. Then, the corner is cut along and glued with side strips.Well, in the end, glue the corners at the corners of the lamp. In the role of glue, you can use glue for ceiling tiles or glue like liquid nails.Everything, we check. Oh yes: the controller is fixed at the bottom,Infrared remote control sensor is also displayed below.The thing is just awesome! It shines brightly, beautifully and consumes very little electricity. I am very pleased with this lamp. I just love him! The function of smooth color change calms nerves after a hard day's work. Make the same lamp and enjoy! All the best.
Production of the lampWe collect all the materials we turn. I ordered the LED strip in China and while it was going I began to make the frame of the luminaire, cut the fabric along the skeleton.
Ikebana for decor for the New Year
Kiwi jam with lemon
Should I buy children's winter clothes online
The three most reliable ways to connect wires in a junction box