How to get a key fragment from the lock

There are many cases in life when failure takes by surprise. And basically, the person is not ready for it. For example, it so happened that the key in the lock broke off and the piece remained inside the lock of the lock. What to do? Well, of course, if the chip sticks out enough to hook it with pliers with thin sponges, then everything is clear: hook on the tip and pull it out. And what if the key broke and the chip does not stick out? I will show you two reliable ways to remove the broken key, leaving the lock after all manipulations absolutely working.

Removing the key fragment from the lock


Before proceeding directly to the extraction, it is imperative to position the key slot exactly vertically, since if the moving cylinder of the larva is not vertical, the key will be impossible to extract.

Method one: scissors


As a rule, a stuck debris can be podkovyrnut scissors. Scissors are easy to reach, their ends are in most cases always sharp.Therefore, we insert the tip into the recess and creating an effort on the fragment and in the direction of its extraction, we are trying to pull out this fragment.
How to get a key fragment from the lock
In thirty percent cases, this method works, of course it all depends on how the key was broken.
How to get a key fragment from the lock
In this case, I show clearly that everything turned out, although I still had to tinker. Scissors are just an example, as they are easier to find. But in general, an awl, a sharp knife and other objects will do.

Method Two: Drilling a Groove

Now we come to a complex method, but more effective. The theory is as follows: in close proximity to the fragment it is necessary to drill out the groove with a thin drill (1.5-2 mm). To do this, parallel to the key, you need to drill a hole to a depth of about 2 mm. Then, from the side, drill a hole, turning it into a groove. And then at the same time drill the key fragment itself for a better hook.
How to get a key fragment from the lock
So let's get started. Make it better with a cordless screwdriver.We drill a hole at a distance of about 1 mm from the groove and to a depth of about 1.5-2 mm.
How to get a key chip from the lock
Then turn the bit under the corner and drill obliquely. How to get a key fragment from the lock
Here you need to be especially careful, as the drill can be easily broken. Especially if it accidentally jumps. In no case should not rush. If the groove is equalized, we drill a piece of the key.
How to get a key fragment from the lock
Well, then we take the scissors and take out the fragment without extra effort.
How to get a key fragment from the lock
The tip fits perfectly into the keyway and into the hole to the key.
How to get a key chip from a lock
This stub is out.
How to get a key fragment from the lock

Checking the operation of the larva

Now, check the operation of the larva. We insert another key and rotate it.
How to get a key fragment from the lock
First one,then the other way.
How to get a key fragment from the lock
The lock is fully functional.
How to get a key fragment from the lock
Now you need to decide on the reasons why the key was broken and fix them. And in order to avoid such problems, you need to lubricate all parts of the lock more often make sure everything works without sticking.

Related News:


Doll Broom
Wooden tantто
Birch Log Candlestick
Baby Rocker
Felted toy - Owl