How to make a drone

Mini drone - a remote control quadrocopter can be very easily done at home. You can use it for games and as a layout to study the work of the drone. The design contains the minimum number of parts, and the construction will take 15 minutes or a little more. Our simple model does not have the speed control of the engines, nor the change in the direction of flight. She does not know how to do anything except to climb up into the air and descend at the touch of a button. But if you want, then you can later build a more serious version and refine it with all the possibilities you want.

You will need to assemble the Drona

And also: ice cream sticks, a gun with hot glue, soldering iron with solder and flux.

More details about the quadrocopter assembly

The remote control with the receiver for remote control can be borrowed from a toy, for example from a broken machine, or you can buy Ali Express. The main condition should be that all the electronics work properly from the voltage of 3.7 V. How to make a drone
The 3.7 V battery is taken from an old mobile phone, you can also buy it - Ali Express. There you can choose much smaller options.
How to make a drone
Mini engines for flying models can be bought - Ali Express.
How to make a drone
Propellers also have to be purchased - Ali Express. They must fit the engines. So it's better to take them in general with a kit - here on Ali. How to make a drone

Making a drone - a quadrocopter

So, first of all we will assemble such a grid of four ice cream sticks. Fix all the hot glue. This will be the main frame of our mini quadrocopter.
How to make a drone
We paste the battery in the same way to the frame.
How to make a drone
We paste four engines with propellers into the corners of the grate. How to make a drone Now you need to make the legs on which the drone will stand.We cut two sticks of ice cream in half.
How to make a drone
Attach to the base.
How to make a drone
Add a receiving remote control. All the engines will be connected in parallel.
How to make a drone
Connect the wires of the engines to the output of the remote control board.
How to make a drone
Connect to the battery.
How to make a drone
Check. Hold the drone from lifting and press the button on the remote control. If the propellers of all four engines are spun, everything works fine.
How to make a drone
We go to the open area, put our quadrocopter and check the work. The drone should fly to the top without any problems.
How to make a drone
If the propellers twirled and the design did not take off, check the battery charge level. If everything is normal, you need to ease the design. In principle, the power of such four motors should be enough with a margin.

Related News:


DIY hanging shelf
Calvados - what is it
Vibro-mouse for games
Children's furniture sets - a combination of comfort and beauty
Tulips pattern for kids
Dry branches in the interior - 45 Ideas