How to make a papier-mâché mask
Making a papier-mâché mask is a fascinating exercise, with which you can express yourself and a great opportunity to use the mask itself both at a costume party and as a gift. This article contains step-by-step instructions for making a mask, accompanied by examples for more visual understanding. 1. Sketch. Draw a sketch that will contain all the details of the future person to facilitate subsequent work. If it is planned that there will be some unusual details on the face (clown nose, lack of a nose), you should display it on the sketch and, if possible, calculate the size of these changes. For reference: approximately the face of a person has a size of 24 by 16 , 5 cm. 2. Model of expanded polystyrene.For reference:
- Of the three pieces of 40-mm of expanded polystyrene, cut the ovals of the size of the desired face. For cutting, a blade from a hacksaw for metal is suitable.
- Glue the resulting shapes together with a PVA glue.Apply glue closer to the middle, and not around the edges.
- Give the model an approximate face shape (no nose, eyes, etc.).
- number 240) the resulting layout.
- Instead of expanded polystyrene, also cozy polystyrene, but it crumbles heavily.
- Ponepolystyrene and polystyrene can be purchased at hardware stores.
- You can use smaller polystyrene foam, but then you need to make more layers ( for a thickness of 20 mm you need 6 pieces, etc. The total thickness should be approximately 120 mm or 12 cm.
- Cover a clay model, then sculpt facial features.
- From the most convex parts of the face, cut a layer of plasticine so that with further coating papier-mache these sites did not look cumbersome.
- Leave the mask to dry for approximately 48 hours.
- Separate dried papier-mâché from plasticine and polystyrene foam.
- Instead of papier-mâché uses polymorphus, in addition, it dries less.
- If papier-mâché is not available, you can make it at home.
- Tear toilet paper into small pieces.
- Pour water in the pot, put it on the fire and put into it pieces of toilet paper.
- Stir, waiting for the water to boil.
- Put a towel on the sink and gently Pour the contents of the pan on it.Steam is hot!
- After cooling the resulting mass, wrap a towel around it and squeeze well.
- Add PVA glue and a little soap to the resulting mass so that it does not stick to hands.
- Before painting, clean the mask with a large sandpaper.
- Apply a layer of putty on wood and wait until it dries.
- Strip the mask again.
- Mix the putty and PVA glue and apply with another layer on the mask (it will dry for about 4 hours).
- Once again clean the mask and cover with a thin layer of PVA.
- Paint with acrylic paints so that the mask lasts longer. It is better to mix paint in a palette, and not on a mask, so that there are no unnecessary divorces.
Belt with beads
3D card with flowers
Funny cloth cat
What outfit to choose on March 8