With the method in question, you can remove dents not only on ordinary untreated wood, but also on varnished, parquet, etc. In general, the method is widely applicable to almost any wooden surface, which is good news. The method is based on the fact that virtually any material, under the action of internal stresses, seeks to restore its original shape. The tree in this regard is no exception. We will only help him to regain his form.
Remove a dent on a wooden
So, there is a small dent on the surface.
Need to take a rag or towel. Moisten abundantly with water. Slightly wring so that the water does not flow down. And put on the surface with a dent.
Turn on the iron to the maximum andiron the surface.
Under the action of hot water vapor, the dent is straightened.
From the first time, the desired result is not always obtained. There is a small notch.
Again, wet the rag and repeat the procedure.
In order to achieve the maximum result, you will need to repeat the smoothing 3-4 times. Although all the envy of the condition and type of the wooden surface. In the end, there will remain a small risk, which is almost not noticeable, compared with what was at the very beginning.
I repeat that with this simple method you can remove dents even on lacquered furniture. Of course, the result may not be 100%, but a noticeable improvement will be clearly visible. Tip:to enhance the smoothing effect, before ironing, you can sprinkle water on the nozzle and let stand for minutes10-15. I repeatedly had to use this method and in most cases, after the restoration, there were no traces. Take it and use it.