How to sew a textile doll in stages

A handmade doll is always individual. It can be created from various materials and become a unique gift for your friends and relatives. It is not at all difficult to make a textile doll by yourself if you once held a needle in your hands. And if you know how to use a sewing machine, then this is simply wonderful.

The process of making a body

In this master class, a gabardine cut of about 30 x 40 cm was used. You can use dense knitwear, calico , flax mixed with cotton, etc. We fold the fabric in half, transfer the pattern onto it, which should be placed along the lobe thread. The pattern can be printed out on a printer or attached to a computer monitor sheet, and then cut around the contour. To make a doll, you should have the following blanks:
  • - head (in front) - 2 pcs.
  • - head (neck) - 1 pc;
  • - body - 2 pcs;
  • - arm - 4 pcs .;
  • - leg - pieces
How to sew a textile doll step by step
After the pattern has been transferred to the fabric, stitch along the contour. In the photo with the pattern, the dotted line indicates those places that should not be sewn immediately. They are necessary for turning and subsequent packing. It is recommended to first stitch on a piece of fabric and only then cut, stepping back from the seam of 3-5 mm. It is good if there are zigzag scissors on the farm. If they are not, then in the rounded areas we make small notches, especially near the finger on the hand. This is necessary so that after turning the blanks onto the front side, the fabric is not pulled in these places. To create the head, we first grind together two identical parts for the face. Then we unroll the workpiece and connect it to the back of the head. Leave small open segments in the neck and neck.
 How to sew a textile doll in stages
How to sew a textile doll in stages
 How to sew a textile doll in stages
How to sew a textile doll in stages
 How to sew a textile doll in stages
 How to sew a textile doll in stages
How to sew a textile doll in stages
Once you have stitched and cut out the legs, we twist them, unfold them in the sock area. We connect vertical seams with each other, form a rounded foot, fix with pins or a mark, we grind it on the machine. We turn out all other details. It is more convenient to use a sushi stick or a knitting needle for this, the main thing is not to have a sharp end, otherwise you can deform the seam. You can use holofiber, synthetic winterizer, sintepukh, etc. for stuffing. most convenient to work. As a tool can be the same stick for sushi, pencil, tweezers, etc.In some cases, it is possible to break off the tip of the wand so that the filler does not slip through it. After filling the calf, fix it with pins, but do not sew it yet. It is worth noting that the neck should be very tight. We put on the blank of the head, which is not yet filled with padding polyester, align the position and sew with a secret seam. Then fill the head with the back of the head. It should also be very dense. We fill the arms and legs according to the same pattern: first tightly to half, then we tighten the “elbow” and “knee” places with a thread, then we add filler, but quite a bit, we sew with a regular stitch.
How to sew a textile doll in stages
 How to sew a textile doll in stages
How to sew a textile doll step by step
 How to sew a textile doll in stages
How to sew a textile doll in stagesHow to sew a textile doll step by step
 How to sew a textile doll in stages
At the next stage, you can sew limbs with a secret seam . We sew the legs in two stages - we tack on the body, we hide this line inwards and sew it with a secret stitch.

Dress the doll and create an image for it

Now you can dress the doll and make it hairs. Yarn was used for the hair in this master class. We wind it on a book, the width of which corresponds to the length of future hairs. On the one hand we cut the yarn, straighten it and sew in the middle. It is necessary to put thin paper under it (for example, toilet paper), otherwise the yarn will crumple when sewing.
How to sew a textile doll in stages
 How to sew a textile doll in stages
So we we get tressy that sew around the head, starting from the bottom. Form the pupa hairstyle, draw eyes, nose and mouth. To do this, it is better to use acrylic paints, which when dry are not afraid of water.For reliability, the face can be sprinkled with acrylic varnish.

Related News:


Tea Rose
Protein diet
Low cost workplace lighting
How to make a scooter
Stained Glass Butterfly
How to hang a hook in the bathroom
Paper model of the Yak-2 short-range bomber