Knitted cute crocheted bunny

We crochet acute eared bunny.

Materials and tools:

  1. yarn (80m / 50g);  
  2. hook number 3;  
  3. filler (sintepon);  
  4. some cardboard for the base of the legs;  
  5. eyes and nose or beads and a button for the face.

Legend:

  1. rev. - air loop
  2. Art. b / n - column without nakida
  3. increase = 2 tbsp. b / n in one loop of the previous row
  4. submission = skip 1 tbsp. b / n the previous row, knit 1 tbsp. b / n

Knitting description

Head

Row 1: Dial 2 Air. p. and closes the ring, knit 6 tbsp. b / n. (6);

Next, knit in a circle.

Row 2: increase * 6 times (12);

Row 3: (1 item b / n, increase) * 6 times (18);

Row 4: (2 items b / n, increment) * 6 times (24);

Row 5: (3 items b / n, increment) * 6 times (30);

Row 6: (4 items b / n, increase) * 6 times (36);

Row 7-13: no change (36);

Row 14: (4 items b / n, decrease) * 6 times (30);

Row 15: (3 items b / n, decrease) * 6 times (24);

Row 16: (2 items b / n, decrease) * 6 times (18);

Stuff with filler.

Row 17: (1 item b / n, decrease) * 6 times (12);  

Row 18: * decrease *, repeat * until the hole closes completely.  

Torso

Row 1: Dial 2 Air. P.and closes the ring, tying 6 tbsp. b / n. (6);

Next, knit in a circle.

Row 2: increase * 6 times (12);

Row 3: (1 item b / n, increase) * 6 times (18);

Row 4: (2 items b / n, increment) * 6 times (24);

Row 5-7: no change (24);  

Row 8: 6 allowances, (1 items b / n, decrease) * 4 times (14);

Row 9-11: no change (14);

Stuff with filler.

Row 12: (1 item b / n, decrease) * 6 times (8);

Row 13: * decrease *, repeat * until the hole closes completely.  

Eyelet

We knit 2 details.

Row 1: recruit 10 air. p. and knit art. b / n. the second loop from the hook, 4 tbsp. b / n, 3 semi. с / н, 6 tbsp. s / n in the last loop. Turn knitting. 3 half s / n, 5 tbsp. b / n, 1 connecting loop (23);  

Row 2: 5 connecting loops, 13 tbsp. b / n, 5 connecting loops (23).  

Lower Leg

We knit 2 details.

Row 1: dial 7 air. p. and knit art. b / n. the second loop from the hook, 4 tbsp. b / n, 3 tbsp. b / n in one loop, turn knitting clockwise, 4 tbsp. b / n, 2 tbsp. b / n in the first loop (14);

Row 2: increase, 4 tbsp. b / n, 3 increments, 4 tbsp. b / n, 2 increments (20);

Row 3: 4 Comm. column, 10 art. b / n, 6 connections columns (20);

Row 4: we knit 20 Art. b / n for the back wall of the loops of the previous row (20);

Row 5: no change (20);

We put in a cardboard base.  

Row 6: 3 tbsp. b / n, (1 item b / n, decrease) * 3 times, 8 itemsb / n (17);

Row 7: (1 item b / n, decrease) * 6 times (11);

Row 8-9: no change (11);

Stuff with filler.

Row 10: subtraction, 3 items b / n, subtract, 4 items b / n (9);

Row 11: no change (9);

Row 12: * decrease *, repeat * until the hole closes completely.  

Upper foot

We knit 2 details.

Row 1: recruit 4 air. p. and knit art. b / n. the second loop from the hook 1 st.b / n, 3 tbsp. b / n in one loop, turn knitting clockwise, 1 tbsp. b / n, 2 tbsp. b / n in the first loop (8);

Row 2: (1 st.b / n, increase) * 4 times (12);  

Row 3: no change (12);

Row 4: 2, 8 tbsp. b / n (10);  

Row 5-9: no change (10);

Stuff with filler.

Row 10: * decrease *, repeat * until the hole closes completely.

Tips for knitting and assembling

Do not stuff a lot of head. A heavy head will shift the center of gravity and the bunny will not stand, but will fall under the weight of its head. In this case, the trunk and legs are packed more tightly.

We put the cardboard base in the legs for stability. When we tie up the legs to the 5th row, we cut out 2 pieces of cardboard to the size of the resulting foot and put them into the leg, and only then we make cuts and fill it with filler. &Nbsp;

The 4th row of the leg must be tied only behind the back of the hinge.This moment also affects the stability of the toy, because With this knitting method, the base of the leg (foot) is completely flat.  

At the assembly stage, at first we pin the legs to the body with a needle and make sure that the toy stays steady. Then we make a movable thread of the legs. We pull the threads of fastening and check the stability of the toy while standing and sitting. If you need to rework, if the toy is not worth it.

Making a bunny's face

When we sew our eyes and nose, we draw the ends of the threads to a single point in the upper part of the head where the ears are attached, and in the lower part (around the neck). We tighten these threads, then we can slightly drown the eyes and spout, and also give the head the necessary lightly flattened shape. &Nbsp;

Slightly tint the eyeshadow of a dark gray color to the face around the nose.

Embroider eyebrows. From the location, length and angle of the eyebrows depends the expression of the muzzle of the toy, so first cut the piece of thread along the length of the eyebrows, apply them to the muzzle and select the desired position of the eyebrows.

To comb a bunny, we use a comb, a puchherka, and best of all, a velcro.



Related News:


Macaroni tea set
Design bathroom tile
Invisible Ink
Making a wicker fence
Wedding Invitations Handmade
Wardrobes - MebShop
Strawberry Tiramisu