Lamp - Carrying
If you are an avid car enthusiast or a jack of all trades, then you certainly have a garage or a suitable shed. It is in these areas that the main need for work is the lamp - carrying: there is always a place that is difficult to access for table and wall lamps, or small parts that require a concentrated beam of bright light. Lamp - carrying can easily be done from the available throwing material with your own hands. A little patience and half an hour of time - that's all you need to create this homemade! Materials for work: • A cord (for example, from an old vacuum cleaner) with a working plug at one end - 1 pc .;• Suspension lamp holder for the lamp - 1 pc; • Empty foam cylinder from the mounting foam - 1 pc; • Chandelier body with a horn (without a plafond) - 1 pc; • Short bolt 3 pieces; • Nut - 3 pieces; • Drill, thin drill bit, screwdriver. Stages of work execution: The first stage: we bring wires. We release the old chandelier from the plafond.Find the wire from unused household appliances (in the present embodiment, the cord from the vacuum cleaner is used).It is desirable: the wire is longer, with a double insulating layer, so that it has a working plug at one end.Unscrew the horn from the body. We thread the cord into it so that the direction of movement goes towards the connection of the horn with the canopy.The second stage: connect the wires. We are looking for a lamp holder for the lamp.We disassemble it into its components: disconnect the body and the threaded sleeve, remove the porcelain liner.Drawn out of a horn free the end of the cord from the outer insulation, we clean the wires themselves (by cutting and removing the inner insulating layer from both wires).Further work is carried out inside the luster case.First we insert the wires into the body of the cartridge.Fixing it with a special nut that secures the chandelier's horn to the body.Next step: connecting the wires to the porcelain insert of the cartridge.To do this, twist a loop at the end of each wire.Unscrew the contact screws on the porcelain liner. We put on a cog in a loop. We put the screw in place and fasten it tightly to the insert (the wire ring remains under the screw on the insert).After twisting the contact screws, we place the porcelain liner into the body of the cartridge (wires inside).The third stage: we make a reflector. To concentrate the direction of the light, we make a “curtain” - a reflector, cutting the spade-like detail out of an empty foam container.
Connecting cartridge case with threaded sleeve.
>img src="https://sdelaysam-svoimirukami.ru/images/14/612-lampa-perenoska.jpg" alt="Carry lamp" title="Carry lamp">We put chandeliers into the body stripped wires.
Baked Hasselbeck Potatoes with Garlic and Thyme
Patchwork box needlewoman
Give a couple of impressions - discuss gifts for two
Breakfast table: choose a convenient model
Paper model of the Yak-2 short-range bomber
Polymer clay lamb
We roll up birch sap