Making a wicker fence

An excellent option for the fence of the suburban area is a wicker fence. The first advantage of this option is that it is an economical fence. Of course, you can buy ready-made material, but if you live in an area where a lot of trees grow, then you do not have to invest in it. And the second advantage of this fence is beauty. This type of fencing has a rustic style, which is very well suited for summer cottages where you just come to relax or barbecue.
 Making a wicker fence
So, in order to make such a fence, you will need to prepare material. The most favorable time for this is the end of spring. It will be easier for you to harvest branches for a fence if they are without leaves. In addition, it is better to use fresh plants, not dry, so that they are well bent,and did not break.
Making a wicker fence
First, poles are driven into the ground. For them, you can use wider branches. To make them easier to drive into the ground, you can sharpen the edge of the column with an ax, making a peg out of it.
Making wicker fence
It is convenient to use a sledgehammer for driving in posts.
Making wicker fence
Pillars are filled at the same level with a step of not more than one meter. Although there are no specific rules, you decide what step to take between the pillars. The deeper to drive in the fence posts, the better. To ensure that the structure is strong, it is recommended to drive the supporting poles no less than 40 cm deep.
Making wicker fence
After all the posts have been installed, you can start weaving the fence. For this, thinner branches are taken and wrapped around the posts with a snake. The option that is provided in the illustration is the most common and simple.Here you need to twine the branches one by one. Each subsequent row is interwoven in the mirror image from the previous row.
Making wicker fence
 Making a wicker fence
 Making a wicker fence
 Making a wicker fence
 Making a wicker fence
 Making a wicker fence
If the length of the fence exceeds the length of the twigs for weaving, then here it is recommended to do everything consistently. For example, the length of your fence should be 10 meters, and your twigs have an approximate length of 2 meters. In this case, it will be more efficient and more beautiful to first pass the first row along the entire length of the fence, setting 5 rods 2 meters each, and then proceed to the second row.If you first completely expel 2 meters of the fence, then two more, and so forth, these fragments will be visible, as there will be a smooth interweaving. In addition, it is much more beautiful when rods of approximately the same thickness are used. These fences can be of different heights. These can be low fences, for fencing the alley with flowers, or for separating the beds. Also, such fences can be used as the main fence suburban areas, recreation areas, or even street cafes.
Making wicker fence
 Making a wicker fence


Related News:


Hanger in STAR WARS style
Armenian nutmeg cake
Simple flasher on NE555 timer
Pancakes are a traditional Russian dish
Newspaper Stroller
Lava Lamp