Installation of drywall to the wall with your own hands

One of the most common alignment options for walls is the installation of drywall. Many masters use this construction material, because it's easy to work with, and quickly. Whatever the curved walls, with the help of sheets of drywall they can be easily leveled. In addition, it is an environmentally friendly material that does not emit harmful components and, if properly used, does not crumble over time.
DIY installation of drywall to the wall
So, first you need to calculate the number of drywall sheets that you will need to finish the walls of the room. To do this, measure the length and height of all walls of the room with a tape measure, and multiply these figures. Thus, you can get the area of ​​the entire room. But to determine the clean area, you need to subtract the area occupied by the door and window openings. There are several technologies for mounting drywall sheets.For example, a fastening to a metal profile that is mounted to a wall is often used. In this article we will consider another option - fixing the drywall at once with glue. This option is ideal for walls that have small bumps. In the example in the illustration, relatively even walls are given. This is a cob house with wooden slats. If the walls are made of bricks, then you can additionally fasten the metal mesh before installing the drywall.

Mounting the drywall to the wall

"text-align: center;">Installing drywall to the wall with your own handsInstalling drywall to the wall with your own handsMounting drywall to the wall with your own hands This is important for the glue to be well attached to the wall, since the dust will repel it. Primer can be a brush or broom. After that, the wall height is measured, and if the drywall sheet is longer, it must be trimmed. It is convenient to do a construction knife. Next, mix in the bucket glue.What proportions of glue and water you can read on the package. You should not make too thick glue, better a little thinner. Since one batch in the usual bucket you most likely do not have enough, then you will have to do two batches for one sheet. Stir the glue thoroughly with a mixer. After you have stirred the glue, using a spatula or trowel, scatter it on the wall. If the glue is liquid, it will easily stick to the wall.
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Then lean the sheet of drywall, and, tapping on it, level building level. It is better to use the level of the original, to more accurately align the walls. First, align the sheet vertically. After that, lean the level or long rule horizontally against the drywall and make sure there are no gaps.
Installation of drywall to the wall with your own hands
Do-it-yourself drywall installation
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Then you can additionally fix the drywall on the screws, about 6 - 10 per sheet.
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Next, proceed to the installation of the next sheet. Everything is done in the same way. When the second sheet of drywall is installed, you also measure the level vertically, and then check the horizontal level with the previous sheet. In addition, in some places you will need to trim the drywall for pipes, or electricians. This should be done immediately before you install the sheet on the glue. Trimming is done with a construction knife. If it is necessary to drill a hole in order to stretch the electrical cable, this can be done with a drill.
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Installation of drywall to the wall with your own hands
Immediately notice how the cable runs under the drywall, so that when you tighten the screws, do not accidentally get into it. When you complete the installation of drywall to the wall, seal all joints between the sheets, as well as in the upper part between the drywall and the ceiling. To do this, you can use a special self-adhesive mesh (serpyanka). Having pasted it, putty all seams with a special putty for seams.

Related News:


Provence-style kitchen interior
How to sheathe the stairs
Patchwork box needlewoman
What do wives love
Design solutions for the kitchen in Khrushchev
Dove of Peace: DIY Hand Made May 1