Regular wall clocks can be purchased at any store, the choice is quite wide. But the thing made to someone as a gift with their own hands, will look much more spectacular. In addition, it will serve as a reminder of the pleasant moments associated with the author of the work. Therefore, I bring to your attention a small master class for making watches from a regular sheet of plywood. Tools will be needed for work: - saw; - drill;Cut out each number in a small square and put them on a blank.
- sandpaper; - ruler; - pencil; - various brushes; - hairdryer; - iron; - scissors; - foam sponge. br> And from materials it is necessary: - plywood sheet; - acrylic paints; - acrylic primer; - PVA glue; - varnish for hair; - acrylic lacquer; - water; - clockwork. First of all, you should decide on the shape of the future watches and their sizes. Then we draw the contour and cut it. The edges are cleaned with sandpaper to form a small chamfer.On the blank you need to note the center through which the clockwork will be fastened.Apply tags on plywood with a pencil.Draw two intersecting central lines.
- sandpaper; - ruler; - pencil; - various brushes; - hairdryer; - iron; - scissors; - foam sponge. br> And from materials it is necessary: - plywood sheet; - acrylic paints; - acrylic primer; - PVA glue; - varnish for hair; - acrylic lacquer; - water; - clockwork. First of all, you should decide on the shape of the future watches and their sizes. Then we draw the contour and cut it. The edges are cleaned with sandpaper to form a small chamfer.
Now you should drill a hole at the intersection of the lines.We clean the edges of the hole, if necessary, we bore it so that the mount for the clock mechanism will pass. We cover the blank with acrylic primer in two layers with intermediate drying in 1 hour.The sides of the workpiece should also be covered tom.Choose a napkin you like. It must be a three-layer. Separate the color layer from the rest.Now we breed PVA glue with water in equal parts in small containers, mix it.We cover the backdoor obtained mixture and completely dry the hair dryer.We put the napkin on top of the blank. We tear off the part that goes beyond the contour of the watch, taking into account that a small part should be bent on the reverse side of the blank.Put a sheet of paper on top and carefully stroke a napkin through it. First, the front side, then the sides.We brush the remains of the napkin on the back side and glue it with the help of a glue diluted in water .We give a good dry.If you wish, you can make some elements a little brighter with acrylic paint.Since I didn’t find the right color when I bought my watch, I just acquired the cheapest, they were green.I simply paint them with acrylic paint.After the paint dries, I coat them with three layers of acrylic lacquer.In the photo, the varnish is only applied and therefore appears white, after drying it will become transparent.We return to the watch body. The napkin must be coated with acrylic varnish. If you do it right away - the napkin will wrinkle. Therefore, we first apply a layer of hairspray, a little and evenlyAnd completely dry the hairdryer.Now you can start coating the workpiece with acrylic lacquer.Leave to dry for 2 hours Before you begin to apply the dial should be applied at least 5 layers of acrylic varnish, not carefully forgetting to dry each of them.Now we need the numbers for the clock. They can be painted with acrylic paint or printed. I printed several options and chose the most suitable.
Salad Snack in Pineapple
How to decorate niches
Postcards on March 8 - a miniature bouquet of flowers
Bulk Birthday Cake
Bag of old jeans