A computer usually stands on a table near the wall. Together with the computer are usually used different things that you want to keep within easy reach. For such trifles, I propose to build a compact spacious three-story shelf, which is conveniently hung on the wall next to the computer.For this you will need: - 10 mm thick plywood; - electric jigsaw; - drill, drills; - screws (self-tapping screws) - 16 pieces; - dowel-hook - 2 pieces; - grinding skin; - lacquer; - self-adhesive film; - pencil, compass, ruler.The shelf consists of seven parts, two of which are pairwise identical.All parts are cut out with a jigsaw with a small-toothed nail file made of 10 mm thick plywood. The parts are fastened with 3,5x40 yellow (golden) screws with a hidden cap. The places for screws are marked only on planes.Drill holes for the screw to pass through, countersink the holes. The holes in the ends are drilled in the middle of the thickness of the plywood, the location of the holes is not difficult to calculate independently. To fix the shelf to the wall, we drill holes for the dowel-hook approximately 1 cm from the edge in the corners of the upper horizontal and large horizontal shelves.After how all the parts are ready, we clean them. Radial places smoothly cleaned. If the plywood has defects, we putty and clean it. We cover with all varnish. For decorative plane pasted film. Do not forget to mark the holes. Details are ready for assembly. Assembly order. We fasten all vertical elements to the longest horizontal part No. 1. Then fasten the remaining horizontal. We put a shelf on the wall.Mark the installation location of the dowel hooks. Set the hooks. Hang a shelf. Everything.
Bilateral Snow Maiden (Christmas tree toy)
Compression stockings: products for beauty and health of the feet
How to design a house
Studded bra own hands
Secrets of arrangement of a cozy children's room for a girl