Toy Car Garage

When your child is a naughty little boy who constantly needs cars, no matter how many of them are in the house, it's time to think about such a necessary thing as a garage. Usually, small “models” tend to get lost somewhere, so the garage, more than ever, by the way, will help solve this problem, plus everything, will teach the child that every thing should have its place.
toy garage for typewriters
In order to make dreams come true, you do not need to have seven spans in your forehead. The simplest set of tools and plywood, will help make an excellent two-story garage with a flyover. Any boy will be interested in such a toy, as well as the very process of its creation, in which you can fully participate. Perelopativ a lot of information on how to build a toy garage, except for the construction of an ordinary house with a roof is nothing. Therefore, experience shows that the best garage is one that is built and designed independently.After thinking over all the details and building a drawing, I got a really interesting model of the garage, and the work took no more than three hours. To make a toy garage, you will need components such as: • plywood sheet (0.3 cm); • • PVA glue; • • jigsaw; • • fabric; • • emery paper; • ruler; • pencil. We divide all the work into three stages: building a drawing, cutting out parts from plywood, collecting the finished structure. In order not to paint for a long time, what's what, I propose to print the drawing proposed by me, on which all the dimensions are applied, as well as the number of parts. Looking at the drawings, it may seem that the work is going to be difficult, but in fact everything is simpler, and you will be convinced of this after you start to collect the garage.

First stage - transfer of the drawing to plywood

Armed with a ruler and a pencil, you need to transfer the existing drawing of parts to the working surface - plywood. For this, measuring the length and width indicated in the drawing, you need to build a similar one on the plywood. Do not close the parts too close to each other, because in order to save material, an incident can occur - when cutting, plywood can break at the most unsuitable place.After all the details are ready, you can proceed to the second stage - cutting them. detail drawing
detail drawing
drawing of details
drawing of detailsdrawing of details
detail drawing

The second stage - cutting out parts

In order to cut out exactly all the available parts, you need to use a jigsaw on a tree. Who has an electric jigsaw, this procedure generally takes a few minutes. If such a miracle of technology is not at hand, the usual jigsaw will work for you. It is worth noting that before starting work, plywood should rest at room temperature and low humidity so that the edges are not sprinkled and the cutting is softer. First, you need to cut out the largest parts: the bottom, the roof and the side parts. After that, you can go to more details, carefully cutting them out.
cut the largest parts
cut the largestdetails
 cut the largest parts
The first step is to cut out the parts, and then make holes in them that will be needed for the joints and connections of all details.
 details are cut
 details cut
details are cut out
After all the details are ready, you need to process their edges. To do this, we fix every detail in a vice and weave the edges with fabric.
 details are cut
This procedure is very important, as the child during the game should not get hurt or get thorny from the raw edges of the material.

The third stage is the collection of the garage

We will carry out the work consistently, and if there are any "misunderstandings" in the explanation, you can refer to the photo, where you can clearly see what's what.1. We will need details such as the front of the second floor and the platform. We take PVA glue and cover the gaps in order to glue the parts together by connecting them.
glue the details
2.After that, install partitions that serve as walls that divide the garage for individual cars.
glue the details
3. Next, take the right side part and glue it to the lower front wall of the garage. Then you can combine the two previous parts, resulting in a body.
glue the details
4. When the first floor is fully assembled, installing all the details, you need to do the lifting. To do this, in parallel with the right side part, we install the same part, closing them over partitions, remembering to glue well with glue.
glue the details
glue the details
glue the details
glue the details
glue the details
glue the parts

The final stage is the gluing of the roof and the lowest bridge

toy garage for cars
toy garage for cars
toy garage for carstoy garage for carstoy garage for carstoy garage for typewriters If the description seems complicated, the photos will give a way out of the situation, showing in more detail what to attach. When the glue dries well, you can give your child a garage for games. Such a toy will delight absolutely any boy, and parents will help teach their children to order. that's what happens in the end.
toy garage for cars


Related News:


Herring pate: a wonderful snack worthy of all praise
Embroidery Framing
Knitted vest for a boy
How to make valentines with your own hands - master classes
If children do not want to share