Ways to restore a broken laptop case
Due to competition, many global brands in the field of computer technology, reduce the price of their products through the use of low-quality components. In this regard, among laptops, there is a dependency: if a device with good parameters costs relatively little money, then the manufacturer has invested cheap materials in some part (or part) of the mobile computer, thereby reducing its life. Consider ways to repair the laptop case, which is made of poor-quality, thin plastic with a low indicator of fastening resistance. Ways to restore the mounting racks. As practice shows, first of all, in the case made of poor-quality materials, the racks under tightening and mounting bolts. The rack consists of a plastic cylinder, which is fixed at one end to the body and has stiffeners, and at the other end, from the end, there is a metal nut.Most often, the rack can break at the base of the connection with the case, or a soldered metal nut pops out. Consider how you can repair these two breakdowns.Restoration of fixing a metal nut: 1. If there is a threaded sleeve disconnected from the stand, do not fully screw the bolt into it, and holding the tweezers, heat it over the gas hob. 2. Immerse the heated nut quickly, thread the top into the repaired place flush with the surface of the plastic cylinder, and to stop the immersion of the nut in plastic, cool it with water. 2. Unscrew the bolt from the cooled repair unit. 3. Check the reliability of adhesion of the soldered place. Also in some places of the case where it connects, for example, to the monitor, it is possible not to restore the mounting strips,and fasten the hinges of the monitor directly to the case. Restoring the attachment between the stand and the case: 1. To repair a damaged item, prepare soda and super glue. Screw the bolt into the broken part of the rack. 2. Apply super glue to the broken end of the rack and to its place of installation in the case. 3. Dock and press the two processed, glue, parts. Hold them in this position for about a minute. 4. Spread the soda onto the body as close to the rack as possible so that it covers the fracture well. 5. Liberally apply super glue to soda. 6. Repeat this procedure 3 - 4 times. 7. After drying, check the adhesion of the repaired part for durability. The reaction of the soda with the super glue passes with the release of heat, which ensures reliable integration of plastic parts at the molecular level. It is easier, it will turn out, to break a part of the body next to it, than to damage the surface treated in this way. Repairing the body. A crack or spall may appear on the body. The troubleshooting technique is almost the same, but it has some nuances. Stages of restoring a damaged surface: 1. Connect and fix the crack (chip).This can be done with the help of nylon screeds, clay, etc. When chipped, some, not large, parts of the body may be missing. In order to avoid leakage of glue, the formed openings, cover with clay or attach adhesive tape or tape on the front side. 2. To reduce the spreading area of the glue, around the perimeter, make a barrier of plastine. 3. On the inside of the part in a fenced place, lay the reinforcing layer in such a way as to obtain rigidity in a weakened place. As a reinforcing material, wire, clips, pieces of galvanized strip, fiberglass (fiberglass should be stacked with epoxy glue), etc. can be used. 3. When using epoxy adhesive as a fixer, mix the fixative and hardener in the required volume. And then pour it on the fenced, damaged area. If fixation is carried out with soda and super glue, then the damaged area should be covered with a layer of soda and glue. There should be at least three such layers. 4. After the solid hardening of the adhesive remove the unnecessary elements (clay, screeds, etc.) and check the strength of the repaired part. The photo shows possible options for repairing the case of the Asus K 53 B.
Modern interior of the apartment
Making a picture of veneer
What is an exam
Floor vase made of scrap materials
Home-made condensed milk