is an important event in the life of each couple. I want everything to pass at the highest level and the guests will remember this day for a long time. Wedding is not only the choice of clothes for the bride and groom, rings, banquet hall, presenters and more. But it would seem that such trifles as wine glasses for young people are also an important attribute in the celebration process. Wedding
is a costly event, so if the bride has free time, you can make your wedding wine glasses hands. Very often weddings are performed in a thematic color, with an emphasis on bright colors, for example, red, blue, green. And in this style they make out a banquet hall, a wedding cake, add accessories to the outfits, and also decorate wedding champagne and wine glasses for newlyweds. I want to show a master class on how to decorate a wine glass for the bride with the help of satin ribbons with my own hands. We need:
1. Wine glass. 2. Glue. 3. Satin ribbons. 4. Guipure tape. 5. Shears. 6. Threads with a needle. 7. Beads.
Handicraft stores provides a huge assortmentsatin ribbons in large colors. They are cheap, so you can immediately collect a lot of tapes that differ in width and texture. If the wedding will take place without a thematic color, then you can arrange the wedding glass with classically white ribbons. Otherwise, we choose and buy the colors that we need. For decorating, you can use beads, halves of beads, sequins and other accessories. Wine glasses can be purchased at any store of dishes. They are sold in pairs and even individually. We take a transparent wine glass and wrap it with a guipure tape, thereby measuring the length. Cut off. Lubricate the glass with glue and fasten tape to it. Glue can be used almost any. It can be special for needlework. I use the glue-moment.
The Guipure tape was glued.
Take a white ribbon 2.5 cm wide, apply to the glass,measuring the desired length, grease with glue and glue. Irregularities pull up to the front side of the wine glass, where the joints are connected. The tape can be bristled, so you need to follow and smooth it out.
Take a white ribbon 1 cm wide, measure the length, cut and coat with glue. We apply to the glass and smooth out the irregularities.
Clay is only 2 white ribbons. Fougeres is narrowing downwards, so tapes are more difficult to glue.If at the very beginning we had the ends of the ribbons looking down, now, on the contrary, we will lift them up. Now we will work with the ribbon in bright blue. Imagine that it is in this color that the wedding will be framed. Measure the size, cut off the ribbon and glue. We do these actions right up to the bottom of the wine glass.
The front side, where the ribbons are connected, does not look very neat, but this is only the middle of the work done. No need to worry. We will continue to decorate and decorate our wedding glass.
Take 2 translucent ribbons of blue and blue. They are 0.5 cm wide. We glue them on the last blue tape,and we wind the leg of the glass.
Now we will decorate the bottom of the wine glass with a skirt of ribbons. We take two tapes. One wide, the second narrow. We insert the thread into the needle and sew these lena with each other with a regular stitch. When tightening the thread, it will give us the opportunity to do the assembly on the ribbons. In the process of sewing we pull together and try on. Ribbons in the assembly must wrap the bottom 2 times. svoimi-rukami.jpg "alt =" Do-it-yourself wedding wine glass "title =" Do-it-yourself wedding wine glass ">
Since the wedding wine glass is made in blue, then the skirt should be complemented with this color. We take the blue tape, stitch it, make the assembly and glue to the bottom.
Now let's decorate and decorate the front part of the wine glass. Take a 3 cm wide ribbon. We apply a transparent white ribbon to it and sew them together along the edge.
Bere blue ribbon 1 cm wide. It is a small bow. Attached to a wide gold ribbonto fit the size.
Cut and sew.
Take the translucent narrow ribbons: blue, blue and white. We will tie the bow, and their ends will hang down, therefore we are oriented to the required length at our discretion.
With three transparent ribbons we tie a blue ribbon and get a cute bow.
Sew it to a wide golden ribbon.
Take a half bead and glue to Bantu, thus hiding the thread, and also it is a beautiful decor.
Glue our golden ribbon with a bow to the wine glass.
That's what we have happened. All irregularities and glueing spots are imperceptible.
Next there is a wine glass for the bride in white as a possible design option.
How to increase a virtual diskMini-terrarium in a light bulbHow to make a gift to a man with his own hands30 Family Photo Placement IdeasPotato chipsVideo tutorials for pumping up intimate muscles