Stand for a bottle of wine from newspaper tubes

This stand for a bottle of wine will be an excellent addition to the festive table. It is very light and easy to make. And it will be well harmonized with your interior.  stand for a bottle of wine
For work we will need: - newspaper. - skewer. - scissors. - paper. - gouache or water-based paints. - universal glue "Titan". - brush for painting. Getting Started . We take the newspaper and cut it into strips measuring 10x40 cm. This length is enough for our tube.  Take the newspaper Take the skewer and begin to gently wind the newspaper on it. Twist tightly and slowly. Do not forget to hold the edges of the newspaper and skewers.  wind up the newspaper  wind up the newspaper When we twisted the whole tube, so that it does not untwisted,glue the end of the newspaper to the tube.
 wind the newspaper
 wind up the newspaper
tubes of the newspaper
We cut out the base for the stand from paper. We take a square 28x28 cm, two sides, bottom and right, will also remain twenty-eight cm. On the left side we measure 14 cm. And we cut off from the right base to the left marked point. The cut should be 31 cm. This will be the basis for a stand for wine.
 cut the base
One by one we start to glue the tubes to the base. We let the glue dry well.
 cut the base
Well, our base is ready.
>img src="https://sdelaysam-svoimirukami.ru/images/12/270-nasha-osnova-gotova.jpg" alt="our foundation is ready" title="our foundation is ready">
We cut a circle with a diameter of 9.5 cm from thick cardboard. It will be the bottom for the stand. From the side that will be inside the stand, glue ordinary white paper.We join and glue the base of the stand. We insert and glue the bottom to the bottom dewy edge.
 stand for a bottle of wine
stand for a bottle of wine

stand under bottle of wine
When the glue is dry, we begin to decorate the stand. To do this, take the tube. Squeeze the tube so that it becomes flat. And we start to glue from the top. Pasting on edge only.
 stand for a bottle of wine
When we taped the cut, we continue to stick it to the bottom. Going to the bottom, we make a full turn along the edge of the bottom. And we fix one edge of the tube under the other.
 stand for a bottle of wine
Begin coloring the stand. We will have 2 colors for coloring, it's white and brown. The first layer will be white. We paint everything so that the letter on the newspaper can not be seen. When the paint was dry and there was not a trace left of the reminder of the newspapers,we proceed to the next painting. Take the brown paint and paint everything again. We are waiting for the paint to dry. We paint the same paint on the inner walls of the stand. wine bottle stand When the paint inside is dry, then our bottle stand will be ready.
stand for a bottle of wine
Good luck to all.

Related News:


Flower bed of old tires
Origami Christmas tree toy
Solar Battery
Should I buy children's winter clothes online
How to restore hair after summer
Eco-Friendly Christmas Card